IN Brief:
- Korozo Group has installed a Windmöller & Hölscher nine-layer AQUAREX blown-film extrusion line at its Çorlu facility.
- The line uses downward extrusion and rapid water cooling to manufacture multilayer films for thermoformed food packaging.
- Full production is planned for January 2027, with KOROFORM manufacturing capacity expected to increase by 50%.
Korozo Group has installed a nine-layer blown-film extrusion line at its Çorlu factory in Türkiye, with the equipment expected to increase capacity for its KOROFORM thermoforming film range by 50% following commissioning.
The Windmöller & Hölscher AQUAREX line combines downward extrusion with rapid water cooling to manufacture multilayer packaging films. Installation is complete, commissioning trials are under way, and Korozo is targeting full production from January 2027.
The investment is intended to increase the company’s available output and provide additional flexibility when manufacturing films for food packaging applications. Korozo has not disclosed the capital cost, rated throughput, or additional annual tonnage associated with the installation.
KOROFORM materials are used to manufacture the lower section of thermoformed food packs. A sheet of film is heated and shaped into cavities that hold the product before the package is closed using a compatible sealing film.
Thermoforming changes the geometry of the material and redistributes its thickness. Areas exposed to greater stretching, particularly corners and deep cavities, may become thinner than the original sheet, affecting their resistance to puncture or mechanical damage.
Film properties must therefore be selected according to the shape of the intended package and the conditions used to manufacture it. Mechanical strength, extensibility, heat response, and barrier performance all influence whether the material can be formed consistently.
Korozo supplies KOROFORM films for applications including meat, cheese, and bakery products. Depending on the selected structure and its validated sealing and barrier properties, the films can be used in vacuum packaging and modified atmosphere packaging.
Vacuum packaging removes air from the package before sealing, while modified atmosphere packaging changes the internal gas composition to suit the product and its preservation requirements. Both systems depend on the material maintaining an effective seal and providing suitable resistance to gas transmission.
That performance cannot be determined from film thickness alone. The composition and arrangement of individual layers influence resistance to oxygen and other gases, while sealing properties affect the integrity of the completed package.
The AQUAREX installation gives Korozo a nine-layer manufacturing system capable of producing films with different functional layers. The structure of each finished material can be designed around the properties required for processing, sealing, and product protection.
Multilayer extrusion combines separate polymer melts into one film structure. Individual layers may provide mechanical support, sealing characteristics, or barrier properties, with their relative thicknesses controlled during production.
The downward extrusion process differs from conventional upward blown-film manufacture. Instead of moving upwards through an air-cooled arrangement, the molten film tube travels downwards and is cooled rapidly using water.
Rapid cooling changes the conditions under which the polymer solidifies. In suitable formulations, reducing crystallisation can improve optical clarity and gloss while contributing to mechanical characteristics required by subsequent converting processes.
Windmöller & Hölscher markets AQUAREX as a water-quench system compatible with a range of polymers and multilayer structures. The equipment’s characteristics provide a technical basis for Korozo’s intended improvements in film quality and thermoforming performance.
Those improvements are conditional on the materials being processed. Polymer selection, processing temperature, layer composition, cooling conditions, and downstream handling influence the structure and properties of the finished film.
Korozo identifies puncture resistance, transparency, and deep-drawing performance among the requirements of its thermoforming portfolio. These characteristics are particularly important when packaging irregular products or forming relatively deep cavities.
Maintaining sufficient thickness at formed corners can reduce the likelihood of local weaknesses. Nevertheless, the performance of any finished pack also depends on the forming temperature, cavity geometry, sealing conditions, and subsequent distribution environment.
The company’s wider portfolio includes KOROFORM-RCY, a polyethylene-based thermoforming film with an ethylene vinyl alcohol barrier layer. Its PE/EVOH/PE structure is designed as an alternative to certain conventional materials incorporating polyamide.
Korozo has not specified which individual KOROFORM grades will be manufactured on the newly installed AQUAREX line. The presence of KOROFORM-RCY within the product portfolio should not be interpreted as confirmation of a particular production schedule or material formulation for the new equipment.
Material composition is also relevant when assessing packaging recyclability. Although polyethylene-based structures may simplify some material recovery processes compared with combinations of incompatible polymers, the actual outcome depends on the complete film formulation and the recycling infrastructure available.
Commissioning will establish the operating conditions needed to manufacture films meeting the company’s specifications. Trials can involve checking layer uniformity, film thickness, optical properties, mechanical behaviour, and the consistency of the extrusion process.
These characteristics are interconnected. A change made to improve throughput may alter cooling conditions or thickness distribution, while adjustments to the polymer structure can influence forming performance and barrier behaviour.
Soner Koç, Chief Operating Officer at Korozo Group, has identified additional manufacturing flexibility as one objective of the investment. That flexibility will depend on the line’s demonstrated operating range, the grades manufactured, and the time needed to change between production specifications.
The proposed 50% capacity increase relates specifically to KOROFORM thermoforming films, not Korozo’s entire flexible packaging operation. It remains a planned increase until the new line achieves sustained production under the intended operating conditions.
Korozo’s next milestone is the completion of commissioning ahead of the January 2027 production target. The installation has expanded the factory’s available equipment capability, while the expected gains in film output and manufacturing flexibility will depend on the results of commercial operation.


