IN Brief:
- Life Water has unveiled a 500ml still-water product using Pulpex moulded-fibre packaging.
- The container combines a formed wood-fibre body with a thin internal food-grade barrier.
- The companies have not disclosed Life Water-specific production speeds, recovery rates, or lifecycle results.
Life Water has introduced a 500ml still-water bottle made using Pulpex’s moulded-fibre technology, adding a new beverage application for the UK packaging developer. The product was unveiled on 17 November and is designed for collection through paper and card recycling systems. Its wood-fibre body requires a protective internal barrier because untreated cellulose would not keep bottled water contained throughout distribution and storage.
The product follows Pulpex’s October opening of a commercial fibre-bottle factory near Glasgow, but the two developments concern different stages of manufacturing. Commercialising a shaped container requires reliable moulding and coating; introducing filled water in that container also depends on food-contact compliance, closure integrity, filling-line handling, shelf-life testing, and distribution performance. Neither company has published operating data for the 500ml Life Water format that would allow direct comparison with a standard PET bottle.
Pulpex forms a three-dimensional body from sustainably sourced wood pulp and water before drying it to hold its shape. The company then applies an ultra-thin food-grade internal barrier using a water-based polymer dispersion. That coating has to limit liquid absorption and preserve the filled product while allowing the fibre structure to be processed in an appropriate paper mill. The package is not simply an untreated paper shell, and its environmental performance cannot be judged from the fibre component alone.
Pulpex distinguishes its coated fibre structure from a conventional plastic bottle enclosed by paper. Its recycling proposition depends on the container being repulpable in existing paper and board processes, including the treatment of any barrier material. The coating must remain functional during storage while not preventing fibre recovery during recycling. Those are separate technical requirements, and testing a bottle’s repulpability does not establish how often the sold pack will actually enter a compatible recovery system.
Life Water describes the format as recyclable through existing paper and cardboard routes. Collection and recycling outcomes will depend on local acceptance rules, sorting equipment, contamination, the bottle’s closure and other fitments, and the receiving mill’s processes. Pulpex cites industry-standard recycling assessments for its wider bottle platform, but the companies have not disclosed a recovery rate for the Life Water units or a full breakdown of the packaging components in this launch.
Bottle shape, dimensional tolerance, neck finish, closure application, line pressure, and handling stability determine whether an alternative container can pass through a beverage filling line with acceptable losses. Pulpex has designed its general bottle platform to work with existing filling infrastructure, but plant-specific trials remain necessary. A packaging format that is lighter or lower in carbon at material-production stage must also tolerate conveyors, accumulation, capping, packing, pallet movement, and distribution if it is to operate at volume.
Water bottling still requires a validated hygienic process, reliable closure sealing, and appropriate food-contact testing, regardless of the outside of the container. Shelf-life testing must establish how the filled water and its package behave across the intended storage and distribution conditions. Neither partner has released a measured shelf life, filling speed, reject rate, or verified cost comparison for the new 500ml bottle. Those figures would be needed to determine its performance in production beyond the launch format.
The visible surface of moulded fibre also changes packaging and decoration options. Pulpex states that its production technology can include water-based direct-to-shape digital printing and that existing labelling equipment can be used where appropriate. Such approaches can reduce the number of separate finishing steps for some products, although the results depend on design and manufacturing configuration. The textured surface provides a different shelf presentation from clear PET, but it also removes the immediate visibility of the liquid that transparent containers provide.
Pulpex’s Glasgow factory entered commercial operation in October, and the company’s wider programme includes applications in mineral water and household liquids. The Life Water format adds another specific beverage product, rather than establishing the first use of fibre bottles as a category. Further evidence from repeat production runs would help show how the shaped container and barrier process perform when combined with the bottler’s filling and distribution arrangements.
Life Water and Pulpex have not disclosed initial order volumes, confirmed retail distribution quantities, line efficiency, or a product-specific lifecycle assessment. The 500ml bottle therefore demonstrates a further intended commercial use for moulded fibre without yet establishing the scale of material substitution or real-world recycling achieved. Regular production, product protection, and accepted collection routes will determine how far the format can extend beyond its launch.



