Mitti introduces digital manufacturing quality control platform

Mitti introduces digital manufacturing quality control platform

Mitti has introduced digital checks for active factory production runs. Its manufacturing application records measurements against product tolerances, connects deviations with follow-up actions and tracks downtime across industrial lines.


IN Brief:

  • Mitti Manufacturing launched on 16 November with product-specific checks, production histories and downtime categorisation.
  • Operators record timed or batch checks, while configurable issue categories control how a tolerance breach is escalated.
  • Danone, Mars, Müller and Unilever use Mitti’s wider platform, but deployments of the new manufacturing module were not identified.

Mitti, previously known as SafetyCulture, has introduced a manufacturing application that brings production quality checks, deviation reporting and downtime records into the same digital workflow. Launched on 16 November, Mitti Manufacturing applies product-specific tolerances to checks completed during a production run, allowing supervisors to review results and recurring stoppages. Danone, Mars, Müller and Unilever are named customers of Mitti’s wider platform, but the company has not confirmed that those manufacturers use this newly introduced module.

Operators can enter inspection results on a tablet or computer while a line is running, instead of waiting for paper records to be collected and reconciled. The application compares each recorded value with the specification configured for the product and displays whether the check is conforming, non-conforming or critical. A deviation can trigger an issue record and notification under the site’s configured escalation rules, connecting the measured result to subsequent investigation and corrective work.

The workflow is organised by manufacturing sites, production lines and individual stations. When a run begins, the application activates the check groups associated with the selected product. Timed checks then become due at configured intervals, while operators can initiate event-based or batch checks during activities such as a product changeover. Different products can consequently pass through the same physical station with their own tolerance limits, provided the relevant specifications have been linked to its checks.

Specifications may define a permitted numerical range, such as a minimum and maximum fill weight, or acceptable responses to a categorical inspection. Users can establish separate thresholds for an out-of-spec result and a critical breach. In a food plant, the recorded measurements might include fill weight, dimensions, packaging code accuracy or another controlled process attribute; the appropriate criteria depend on the product and the configured test. The operator’s entry is associated with the product and production run, rather than retained as an uncontextualised value.

A deviation record can retain the observed value, acceptable range, production line, product and timestamp. Authorised staff can then investigate the occurrence, assign actions and document its resolution. Site administrators can choose how the platform responds to non-conforming and critical checks, including the issue category and recipients of notifications. A check with no linked specification still records the entered value but cannot automatically identify a tolerance breach. The software therefore depends on correctly configured limits as well as timely, accurate input.

Downtime can be recorded alongside inspection activity and categorised by the cause of a stoppage. Packaging interruptions might arise from a blocked conveyor, a label application fault, a changeover or upstream material supply. Comparing the lost time attributed to each cause helps engineering and production teams decide which problems to investigate first. Those comparisons require consistent coding: a recurring mechanical fault classified differently by successive shifts would distort the totals and make any apparent improvement difficult to assess.

The connection between inspection results and production periods allows managers to look for deviations occurring around the same interruptions or changeovers. Repeated out-of-tolerance measurements after a product switch, for instance, could prompt checks of machine settings, raw material variation or the inspection method. Software records support that investigation but cannot establish which physical cause is responsible or adjust the production equipment by themselves.

Digital recordkeeping is separate from automatic measurement. An operator may still have to draw a sample, use a calibrated instrument and enter the reading correctly. Mitti has sensor monitoring capabilities elsewhere in its wider platform, but the availability of those functions does not establish an automated connection to every check in Mitti Manufacturing. A plant planning equipment integration would need to establish what data can be transferred, how it is validated and which production record receives it.

Completed runs move to a history view containing recorded checks, failures and an AI-generated report. Mitti says this report summarises anomalies and identifies patterns across repeated runs, while the underlying data can be downloaded for separate analysis. The report is a record of what was entered, not independent confirmation that the checks were performed correctly. Quality teams still need procedures for calibration, sampling, review of exceptions and the closure of corrective actions before treating the record as dependable audit evidence.

The manufacturing module works within Mitti’s existing system for inspections, incidents, training and assigned actions. A quality deviation can therefore be linked to an investigation and a follow-up task without moving the record between entirely separate software products. Whether that reduces administration depends on which processes a factory already manages digitally, how access rights are configured and the requirements of its quality management system.

In a January 2026 study commissioned from Forrester Consulting, 20% of manufacturing frontline supervisors surveyed strongly agreed that their digital tools gave them enough visibility to act promptly, according to Mitti. A further 59% reported workflows fragmented by systems that did not work together. Those findings describe reported operational difficulties; the study was commissioned before this new application launched and does not demonstrate its effect on quality performance or downtime.

Mitti reports that 80,000 organisations use its wider software platform and that it processes more than 3.4 million images and 380,000 inspections each day. Those are platform-wide figures, not manufacturing module deployment totals. The company identifies Danone, Mars, Müller and Unilever among its customers, but has provided no site-specific performance figures for the new application. Its UK operations have been based in Manchester since 2016.

Factory deployment requires more than replacing a paper form with an electronic one. Products need their own specifications, each production line must be mapped to the appropriate checking stations, and administrators must set the escalation rules for values outside tolerance. Staff also need an agreed response when a measurement is critical or a check is missed. Existing plant control and laboratory testing systems continue to perform their separate functions; Mitti Manufacturing principally manages the recorded checks and subsequent workflow.

The usefulness of the resulting data will depend on consistent measurement practices and definitions of faults between shifts. Production managers can compare how long checks take to complete, how often results fall outside specification and which stoppage categories recur. Improvement claims would then have to be tested against an operating baseline, allowing for product mix, line speed and planned changeovers rather than attributing changes automatically to the software.


Stories for you