EU expands authorised food-contact plastics substances list

EU expands authorised food-contact plastics substances list

Four additional substances enter Europe’s authorised food contact plastics list. The approvals cover reinforced PEEK, a mineral filler, a PLA additive, and polyamide manufacture, with restrictions governing composition, migration, and intended applications.


IN Brief:

  • Regulation (EU) 2026/2412 entered into force on 18 November, adding four substances to the EU food-contact plastics list.
  • The authorisations cover carbon fibre reinforcement, uncoated nano precipitated calcium carbonate, a PLA additive, and a polyamide co-monomer mixture.
  • Restrictions include concentration limits, exclusions for particular foods, migration requirements, and defined contact conditions.

Four substances have been added to the European Union’s authorised list for plastic materials intended to contact food, introducing new permitted formulations for certain packaging applications and components used in food production.

Commission Regulation (EU) 2026/2412 entered into force on 18 November, amending Annex I of Regulation (EU) No 10/2011. The European Commission adopted the amendment on 28 October following scientific assessments by the European Food Safety Authority (EFSA).

The newly authorised substances comprise chopped carbon fibres, uncoated nano precipitated calcium carbonate, an additive for polylactic acid (PLA), and a mixture of compounds used in polyamide manufacture. Each authorisation specifies conditions under which the material can be used.

The additions do not provide unrestricted permission to incorporate the substances into food-contact plastics. Their use remains subject to the concentration limits, migration requirements, food categories and other restrictions specified in the legislation.

The first substance, identified as food-contact material substance FCM 1086, consists of chopped carbon fibres manufactured from carbonised polyacrylonitrile. They are authorised for use as reinforcement in polyether ether ketone (PEEK), a high-performance engineering polymer.

The fibres may constitute up to 40% of the material by weight. They must contain at least 95% carbon by weight and must not have any dimension at the nanoscale, with a minimum diameter greater than 100 nanometres.

PEEK is used in applications requiring properties such as mechanical strength, chemical resistance and thermal stability. Incorporating carbon fibres can alter the mechanical properties of the polymer, making the composite suitable for applications where an unreinforced material may not provide the required performance.

In food production environments, specialist engineering plastics may be selected for equipment components and other articles requiring durability under defined operating conditions. The authorisation establishes a permitted composition for a particular reinforced PEEK material, rather than approving all reinforced polymers or every finished component.

The second addition, FCM 1087, is uncoated nano precipitated calcium carbonate. It is authorised as an additive but must not be used in the manufacture of materials or articles intended to contact infant formula.

Calcium carbonate can be incorporated into polymers as a mineral filler, influencing material characteristics such as stiffness and dimensional behaviour. The properties of the finished material depend on the concentration, particle characteristics, polymer and manufacturing conditions.

The amendment includes a compliance warning concerning contact with acidic foods. Under some conditions, materials containing the substance may exceed the overall migration limit, requiring manufacturers to assess the intended application rather than assuming that satisfactory results with one food establish suitability for another.

Overall migration testing measures the total amount of material transferred from a food-contact article into food or an appropriate simulant under specified test conditions. It differs from specific migration testing, which measures particular substances or groups of substances against defined limits.

The distinction is important because compliance with a restriction applying to one chemical does not automatically establish that the total transfer from the finished material is acceptable. Both the formulation and the behaviour of the completed article must be considered.

The third authorisation concerns FCM 1088, poly(2-hydroxypropanoic acid), n-octyl/n-decyl esters. The substance may be used as an additive at concentrations of up to 15% by weight in specified PLA food-contact materials.

The permitted PLA must not contain starch or other additives performing a similar function where those ingredients could increase migration. The authorisation is also restricted to particular types of food and defined contact conditions.

The materials may be used for contact lasting up to ten days at temperatures no higher than 40°C with specified categories of water, fresh or chilled fruit, fresh or chilled vegetables, and vinegar. These conditions do not establish permission for unrestricted hot filling, cooking or other high-temperature food-contact applications.

A specific migration limit of 0.05 milligrams per kilogram of food applies to the substance. The legislation also warns that this limit may be exceeded when testing uses food simulants other than the specified 3% acetic acid simulant.

PLA is used in certain rigid and flexible packaging applications, but its processing and performance characteristics depend on the polymer grade and the additives incorporated during manufacture. Introducing another authorised additive creates an additional formulation option while requiring suppliers to establish that the resulting article satisfies its intended operating conditions.

Temperature and contact duration are particularly important in that assessment. A material intended for short-duration contact with chilled food cannot automatically be substituted into an application involving prolonged storage or elevated temperatures, even when both products use PLA as their base polymer.

The fourth addition, FCM 1090, comprises a mixture of 1,9-nonanediamine, known as NMDA, and 2-methyl-1,8-octanediamine, known as MODA. The mixture is authorised for use as a co-monomer with terephthalic acid in polyamide materials and articles.

The resulting materials must not be intended to contact infant formula or human milk. The combined migration of NMDA and MODA is limited to 0.05 milligrams per kilogram of food.

An additional limit applies to related molecular species with molecular weights below 1,000 daltons. Their migration must not exceed five milligrams per kilogram of food, establishing a separate requirement for part of the molecular fraction associated with the polymer manufacturing process.

The additional condition reflects the need to assess substances produced during polymerisation as well as the starting compounds. A finished plastic can contain lower-molecular-weight species arising from incomplete reactions or other manufacturing processes, and their presence may affect its migration behaviour.

Manufacturers using the newly authorised substances must therefore control the relevant composition and processing conditions while providing evidence of compliance for the finished materials. The authorisations are not equivalent to certification of a particular supplier, production line or packaging product.

EFSA adopted the underlying scientific opinions between 2021 and 2024. Regulation (EU) 2026/2412 incorporates the resulting authorisations into the EU framework governing the manufacture of plastic food-contact materials.

The change is separate from Regulation (EU) 2026/2376, which also entered into force on 18 November and addresses recycled plastic food-contact materials. The two amendments concern different aspects of compliance: the substances permitted in plastic manufacture and the control of recycled material originating from waste.

The four additional entries are now part of the authorised list. Their use in commercial applications will depend on manufacturers meeting the specific restrictions, verifying migration behaviour and documenting the suitability of the finished material for its intended food-contact conditions.


Stories for you


  • EU expands authorised food-contact plastics substances list

    EU expands authorised food-contact plastics substances list

    Four additional substances enter Europe’s authorised food contact plastics list. The approvals cover reinforced PEEK, a mineral filler, a PLA additive, and polyamide manufacture, with restrictions governing composition, migration, and intended applications.


  • EU tightens recycled food packaging compliance rules

    EU tightens recycled food packaging compliance rules

    European rules now tighten recycled plastics compliance across food packaging. The changes introduce revised declarations, material traceability, and customs documentation, with transitional arrangements extending into 2027.