EU tightens recycled food packaging compliance rules

EU tightens recycled food packaging compliance rules

European rules now tighten recycled plastics compliance across food packaging. The changes introduce revised declarations, material traceability, and customs documentation, with transitional arrangements extending into 2027.


IN Brief:

  • Regulation (EU) 2026/2376 took effect on 18 November, amending the existing framework for recycled plastic food-contact materials.
  • Updated requirements address declarations of compliance, batch records, Union registration, and documentation for certain imports.
  • Transitional arrangements extend to 18 February or 18 May 2027, depending on the declarations required.

New European Union requirements for recycled plastics intended for food contact entered into force on 18 November, changing the compliance documentation, traceability arrangements and import controls applying to parts of the food packaging supply chain.

Commission Regulation (EU) 2026/2376 amends Regulation (EU) 2022/1616, the framework governing recycled plastic materials and articles intended to contact food. Adopted by the European Commission on 28 October, the amendment revises the management of the Union register, declarations of compliance, quality records and documentation accompanying certain imported materials.

The changes affect the information passed between recyclers, converters, traders and food businesses purchasing packaging containing recycled plastic. They also reinforce the connection between the material supplied and the recycling processes responsible for producing it.

Under the amended framework, applicable recycled plastic materials and articles must be accompanied by the appropriate declaration of compliance at commercial stages other than retail. Operators receiving products within the regulation’s scope must establish that the necessary documentation is available before accepting them.

The revised declaration system distinguishes between different activities and materials. Declaration P concerns plastic input for decontamination, while Declaration A covers recycled plastic leaving a recycling process. Declaration B applies to subsequent conversion, and Declaration C provides a further compliance document for specified finished products.

These distinctions reflect the different information available at successive manufacturing stages. A recycler must establish the origin and treatment of its input material, whereas a converter needs information about the recycled plastic it receives and the manufacturing operations performed subsequently.

Material traceability is central to this arrangement because the safety of recycled plastic depends partly on its previous use and the effectiveness of decontamination. Collected plastic can contain substances arising from earlier contact with food, cleaning chemicals, inappropriate reuse or contamination during waste collection.

Unlike a virgin polymer manufactured from known starting substances, a recycled material may contain contaminants whose identities and concentrations cannot be established completely from its declared formulation. The regulatory framework therefore places considerable weight on controlling the input stream and validating the recycling process.

Decontamination is intended to reduce possible contamination to acceptable levels under defined operating conditions. Collection, sorting and washing prepare material for that treatment, while subsequent manufacturing operations convert the decontaminated plastic into usable packaging materials or articles.

The amendment strengthens the records connecting those operations. At manufacturing stages subject to quality verification, converters must maintain individual batch records identifying the material and the stage from which it originated. The records must be retained for at least five years.

Such records allow operators to distinguish material processed under different production conditions. Where a compliance concern emerges, the information can assist investigations into the affected batches, their processing history and the products manufactured from them.

The requirements also address the handling of recycled plastic waste and production scrap during further processing. Material reintroduced into a manufacturing operation must satisfy the relevant conditions rather than being treated as automatically compliant because it arose within an existing production process.

Compliance documentation may be supplied digitally under the amended provisions, provided the applicable requirements for the documents are met. This allows information to accompany commercial transactions electronically while retaining the records needed for verification and regulatory inspection.

Food businesses using recycled-content packaging have a limited exemption from passing declarations of compliance to retailers and distributors supplying retailers, where the regulation’s specified conditions are satisfied. The arrangement does not remove the need to hold suitable compliance information or provide the required safety instructions.

These provisions recognise that the information needed by a packaging converter differs from that required by a retailer handling finished packaged foods. Documentation must nevertheless remain available at the relevant stages to demonstrate that the recycled material has been manufactured and used under the prescribed conditions.

The Union register provides another means of connecting material to its production history. It identifies recycling operators, facilities, installations, technologies and associated processes, allowing suppliers and competent authorities to verify information relevant to the manufacture of recycled food-contact plastic.

Identification numbers associated with recycling activities can consequently form part of the documentation accompanying a particular material. The effectiveness of this arrangement depends on the accuracy of the registered information and its connection to the batches being supplied.

Imports are also affected. Specified recycled plastic products and materials released for free circulation in the EU must be supported by particular declarations presented through the customs process. The provisions identify covered categories through customs classifications and distinguish between different forms of recycled plastic material.

They do not impose identical new customs documentation requirements on every plastic package or finished food product. Importers must establish whether their particular goods fall within the specified categories and which declaration applies to the material concerned.

The amendments arrive as recycled polyethylene terephthalate remains an important material for food and beverage packaging. Its use requires assurance that recycled feedstock and subsequent production have been controlled appropriately, particularly where recovered material is intended for direct food contact.

Changes to documentation are therefore connected to existing manufacturing controls rather than replacing them. A declaration cannot compensate for a decontamination process operated outside its approved conditions, nor does a material’s recycled content establish that it is suitable for every food application.

Food-contact suitability continues to depend on the material, its composition, the intended food and the conditions of use. Contact temperature, duration and subsequent processing can all influence the suitability of a finished packaging article.

The regulation includes transitional provisions for products complying with the previous rules. Products requiring Declarations A or B may continue to be placed on the market under the specified arrangements until 18 February 2027, even where they do not meet the revised declaration requirements.

A separate transition runs until 18 May 2027 for defined products requiring Declarations C or P. Qualifying materials and articles manufactured from products placed on the market during the transition may subsequently be marketed until existing stocks are exhausted.

These arrangements concern particular documentation changes and do not provide a general exemption from food-contact safety obligations. Recyclers, converters and packaging suppliers must distinguish the provisions already in force from those benefiting from the transitional periods.

With the amendment effective from 18 November, the next implementation milestones fall in February and May 2027. Operators handling recycled food-contact plastics will need to align the relevant declarations, manufacturing records and material traceability arrangements with those deadlines.


Stories for you


  • EU expands authorised food-contact plastics substances list

    EU expands authorised food-contact plastics substances list

    Four additional substances enter Europe’s authorised food contact plastics list. The approvals cover reinforced PEEK, a mineral filler, a PLA additive, and polyamide manufacture, with restrictions governing composition, migration, and intended applications.


  • EU tightens recycled food packaging compliance rules

    EU tightens recycled food packaging compliance rules

    European rules now tighten recycled plastics compliance across food packaging. The changes introduce revised declarations, material traceability, and customs documentation, with transitional arrangements extending into 2027.